Forgot password

HFJY34

  • 24 Nov 2024 17:57
    Quote
    Reply # 13434451 on 7155071
    Anonymous member

    Painting & playing around. 
    and yes Paul, the rake in the main will be there for sure.

    8 files
  • 14 Aug 2024 12:46
    Quote
    Reply # 13393646 on 7155071
    Anonymous member

    That looks great, very nice!
  • 14 Aug 2024 08:39
    Quote
    Reply # 13393609 on 7155071
    Anonymous member

    Here’s looking aft. 


    Hatches and removable piece in footwell done.

    Outboard well sloping to aperture and glassed. 

    Removed foam and replaced with 3/4” sapele ply glassed over, where hardware is going on. Generous blocking under deck. 2” thickness there. 
    ( decided on mounting the mooring bitts this way as there as not much space elsewhere. Looks a bit weird but should be no problem…)

    Hefty mast step for mizzenmast 


    Putty and some paint soonish. 
    7 files
  • 30 May 2024 10:13
    Quote
    Reply # 13363443 on 7155071
    Anonymous member

    Yes. Heavy enough.. should be ok with, say 6-6.5 ton displacement empty boat. 
    I did some corresponding with Eric Sponberg and he informed me that those older freedom masts were overbuild. 
    The section I’ll be using has a wall thickness of 12+ mm at the step.  That is without gel coat. 
    at the mast head it’s 10,5 mm. Inner and outer layers are fiberglass. 

    Hope to see both you guys later this year. Happy sailing!

    2 files
    Last modified: 30 May 2024 10:14 | Anonymous member
  • 30 May 2024 09:15
    Quote
    Reply # 13363434 on 7155071
    Anonymous member

    Hi Frederik, wow it looks good and very sturdy!

    Amazing to see the wall thickness of the freedom mast.


    Hope to be able to visit you in autumn,

    Paul
  • 30 May 2024 08:14
    Quote
    Reply # 13363429 on 7155071
    Anonymous member

    Looking great Frederik!

    Still, it's amazing how heavy a carbon fibre mast is! 

    Last modified: 30 May 2024 08:16 | Anonymous member
  • 29 May 2024 16:49
    Quote
    Reply # 13363173 on 7155071
    Anonymous member

    Routed/drilled out the hole for the main. Mast off center by 13 cm. Better down below. The sail will be on the port side and closer to the centerline. Diameter 240 mm at the partners  

     
    The fore deck is 5,5 cm thick there, plus the 5 degree angled block gives 10,5 cm.  aft and 8,5 cm forward in total thickness. 
    Bury 155 cm. for 14 meters of mast. LAP to be approx 1250 cm. 
    Lopped off the bottom of  the salvaged Freedom 45 mast, resulting in 14 meters weighing 143 kg. 

    7 files
    Last modified: 29 May 2024 16:55 | Anonymous member
  • 10 Mar 2024 15:07
    Quote
    Reply # 13327328 on 7155071
    Anonymous member

    Time for an update. We’ve been taking it easy the last few months, but a lot of the more complicated work has now been done.
    This winter I’ve built the rudder, daggerboard, stanchion bases and some hatches. Lots of intricate fiberglass work with polyester.  

    Spring is on its way so hopefully temperatures are such that work can continue in the shed. 
    I still need to do the companionway and I’ll have to finish the outboard well. 
    Work on the rig will start soon.  


    13 files
  • 27 Oct 2023 22:06
    Quote
    Reply # 13272541 on 13272434
    Anonymous member
    Anonymous wrote:
    Tony wrote:!Well, thank you Frederik :) I had a great time!

    Hi Tony,

    I really enjoyed the video. Seeing the boat shed, the boat and the boat builder in a video really helped me understand how massive an undertaking it is to build a boat like this.

    Thank you Scott :)
  • 27 Oct 2023 22:06
    Quote
    Reply # 13272540 on 7155071
    Anonymous member

    Correct Scott. 
       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software