SibLim update

  • 29 Nov 2020 15:32
    Reply # 9393003 on 4315719
    Anonymous member (Administrator)

    Congratulations, Annie,
    I hope Fanshi will serve you well.
    As for the way webbing has been used at the mast top, I share Ueli’s nagging worry: There will be a very sharp bend and then the halyard will pull to this and that side as the sail swings about. This could lead to high point loads at the edge of the webbing. You know I used similar mast tops on my Broremann and Frøken Sørensen ( photo below), but these boats were after all only meant for pottering around on the fjord.

    I see Asmat has made the ultimate sunhat from a discarded fender  -  a mighty good idea.

    The trouble you got with ss. bolts on Fantail’s mast top, stems mainly from less than good engineering: An eyebolt protruding from a mast like Fantail’s, is not meant for taking cyclic bending loads from a halyard. Such loads will put very high strain on the top edge of the bolt (and maybe even there were threads there as well?). After a while, the metal may stress-harden and fail. Stainless is particularly vulnerable to stress hardening  -  a cheaper, galvanized bolt would probably have fared better.  Actually, the optimal use of a bolt is to keep it under tension where the whole cross section of it works in unison.

    Cheers, and good luck,
    Arne


  • 29 Nov 2020 13:08
    Reply # 9392819 on 9392799
    i would keep this webbing under regular inspection
    Indeed. Especially in the Southern hemisphere, where the sheep are wearing UV filtering sunglasses. I've cut an old PVC fender up and fitted half of it as a sun hat to protect the webbing at my mastheads.
    1 file
    Last modified: 29 Nov 2020 13:23 | Anonymous member
  • 29 Nov 2020 12:37
    Reply # 9392799 on 4315719

    congratulations for fanshi – she looks great!
    thanks for sharing the pictures (and her whole development anyway…)

    there is one point, i'm not sure about: the webbing which is partly soaked with epoxy resin could develop a weak spot in the small stress area where it changes from epoxy stiffened to flexible. i would keep this webbing under regular inspection, at least at the beginning. (or did anyone try this epoxy-webbing thing before?)

    can't wait to see her in the water…

    ueli



    Last modified: 29 Nov 2020 13:30 | Anonymous member
  • 29 Nov 2020 08:50
    Reply # 9392540 on 4315719
    Anonymous member (Administrator)

    What fun it must have been bringing Fanshi out into the open and to be able to see her properly for the first time! Wonderful - a stunningly beautiful boat - well done Annie. It IS a lovey design and beautifully built. Can't wait to see her in the water and sailing.


  • 29 Nov 2020 08:45
    Reply # 9392538 on 4315719

    Truly beautiful and inspirational Annie.




  • 29 Nov 2020 08:33
    Reply # 9392535 on 4315719

    And the baby weighed. . . . It's been a mighty long gestation. Congratulations Annie. You must be so proud. What an achievement!

  • 29 Nov 2020 08:31
    Reply # 9392534 on 9392510
    Anonymous wrote:


    But the pink. No. Just no. There are too many colours. White would have worked. Perhaps salmon, peach or apricot would have worked. But not a horribly, gruesomely inappropriate chemical pink.  


    Well, there's only one thing for it then - a couple pink coloured sail panels to ruffle the 'anti-pinkers' feathers even more!
  • 29 Nov 2020 08:12
    Reply # 9392512 on 4315719

    Félicitation, Fanshi is gorgeous !

  • 29 Nov 2020 08:12
    Reply # 9392510 on 4315719

    Annie wrote:

    I am dying to know what David will think about his creation, now that he can see her properly.

    What does David think?

    It isn't my creation, it's yours, Annie. I just provided the bare bones of the shape of the boat, and you have put the flesh on those bones, creating a wonderful piece of work that is yours, all yours, and really is something to be proud of. The overall appearance, and the craft work that has gone into the build are all that I hoped that they'd be.

    Fanshi is going to be a head turner, when she's afloat, no doubt about it. Those dragons, the black, red, yellow and aqua paint job ...

    But the pink. No. Just no. There are too many colours. White would have worked. Perhaps salmon, peach or apricot would have worked. But not a horribly, gruesomely inappropriate chemical pink.  

    But that's only what I think. What the proud owner thinks is what matters. Congratulations, Annie! 


  • 29 Nov 2020 07:04
    Reply # 9392406 on 9392108
    Anonymous wrote:

    Hey!  It's all happening here in Godzone.  LCB is sailing again and Fanshi is out of the shed!   Have a look at my blog for all the latest photos (of Fanshi, that is).  I hope to post a video on my YouTube channel, soon, for those who enjoy these things.

    Wow.

    The dream about to become reality.

    Those colours I reckon are great by the way - they just "fit" to the boat's style and design in my opinion.

       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software