SibLim - the setup

  • 10 Nov 2015 23:46
    Reply # 3627120 on 3520497

    Annie

    Looks great, and I reckon you're still on track for a launch on the 5th ;-)

    Peter

  • 10 Nov 2015 22:18
    Reply # 3627016 on 3520497
    Anonymous

    I realise that taking photos and uploading them can become a real "chore"...but it is wonderful to see it all coming together...I am sure there are plenty of people checking in on a regular basis to see the progress. So, thank you!

    Last modified: 10 Nov 2015 22:19 | Anonymous
  • 10 Nov 2015 19:46
    Reply # 3626806 on 3520497
    David beat me to it - but you can see the photos of the backbone in place in my photo albums.

    Mark: if you follow this thread you can work it out how long each stage has taken.  Personally, I'm not sure what is a major operation and what is a minor one!  I have started putting dates at the start of each set of photos, but don't have time to go back and do all the previous ones. 

    Last modified: 10 Nov 2015 19:47 | Anonymous member
  • 10 Nov 2015 13:27
    Reply # 3626300 on 3520497

    I see I should have said, very roughly how many days for each major operation.

    David, you are mistaken, is it not a factor of 3!  (also a very good way of accurately gauging wave height)

  • 10 Nov 2015 08:22
    Reply # 3626043 on 3520497

    Today's achievement was to get the backbone fitted into the slots in all the bulkheads, and then filleted into place - with a break in the middle of the day to go and buy some iroko for the skegs. Another good day's work.

  • 10 Nov 2015 02:33
    Reply # 3625631 on 3520497

    Or let's put it this way. 

    A professional needs to keep a timesheet, to know how much to bill the client, and to attempt to make a living.

    An unskilled amateur will spend a long time learning skills and techniques, and doing everything slowly and carefully, with much time spent in figuring out how to do things. To keep a timesheet would be meaningless, but certainly the unskilled amateur is going to take much longer.

    A skilled amateur will decide on the level of complexity, finish and accuracy that is to be aimed at, and this will vary widely between builders, so again a timesheet would be meaningless.

    There are a few meaningful statements one can make, though, such as:

    " Building a boat takes at least twice as long, and costs at least twice as much as the number you first thought of".

    The best advice I can give to a first time builder is to Keep It Simple! That's the best way to get a project finished and to get it finished at a reasonable cost and in a reasonable time. 


  • 09 Nov 2015 18:56
    Reply # 3625103 on 3624614
    Mark Thomasson wrote:Great to see a dream coming true and at a very respectable rate of progress.

    Are you logging hours?  It would be very informative to all us would-be dreamers (and optimists!)


    Let's put it this way.  I get up at 0630 and spend 2 or 3 hours getting breakfast, answering emails, dealing with JRA Committee stuff and other things such as baking bread, laundry, dumping rubbish, fetching water, etc.  Then, I go into the building shed and work until 1730, with two half hour breaks.  David, bless him, has usually been there since 0830 and ideally would knock off at 1630, but I push him into overtime.  We then have a drink and I usually go back and work until anywhere between 1930 and 2030.  If I knock off at the earlier time, I walk across the yard and have a shower. Otherwise I then cook dinner and try to get into bed before 2230.  I also have to fit in shopping, brewing beer, etc.

    In a nutshell, building a boat for yourself takes all the time you can give it, and then some.  When you live alone, you have to do all the general day to day chores as well.  It certainly keeps you busy!  0755 - just about to go and fetch the bedding from the coin-op washer to hang out to dry.



  • 09 Nov 2015 13:26
    Reply # 3624614 on 3520497
    Great to see a dream coming true and at a very respectable rate of progress.

    Are you logging hours?  It would be very informative to all us would-be dreamers (and optimists!)


  • 08 Nov 2015 19:42
    Reply # 3623473 on 3622167
    David Tyler wrote:

    we got bulkheads 5, 6 and 7 erected.

    And they can be seen here.
  • 08 Nov 2015 07:53
    Reply # 3622167 on 3520497

    Today was also a very productive day, as we got bulkheads 5, 6 and 7 erected. All went well, and we're getting the waterlines marked on each bulkhead horizontal and at the same level as those on bulkheads 3 and 4, within close limits. I'm very well satisfied with the accuracy of the setup. The shape of the after part of the hull is now emerging, and we're beginning to see something that looks like a boat!

       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software