I've hoisted Flutterby's mizzen sail (finally!) after waiting way too long since I sewed it together. Here are three pictures:
First hoist, with just some loose parrels, the yard hauling parrel and topping lifts rigged
First hoist pic in my gallery here
"Second" hoist (even though I had hauled stuff up and down the mast at least six times by then) with a complete set of Slieve's spanned downhaul/parrels, hong kong parrels, and sheeting rigged
Second hoist in my gallery
At this point I noticed that I was getting some serious twist/distortion in my bottom panel.
View of twist in second hoist
Since I don't want to sail off the dock here I won't be sheeting it in hard and seeing what happens when I actually try to sail, but I've got a few ideas that I might try out if this problem is confirmed in my test sails...but I'll leave that for another day.
Main sail (split rig) is next, and I've got quite a bit to do before I can get it to the stage the mizzen is at today.
Edit: I wanted to include the pix in the body of this message and that didn't work. Can somebody remind me how to do it with pix from the gallery here? I found how to put in links, but they don't show up as images.