Hartley TS16 project "Redwing ll"

<< First  < Prev   ...   5   6   7   8   9   Next >  Last >> 
  • 12 Feb 2021 19:19
    Reply # 10089350 on 10087530

    I agree with that weight, Arne. I'd be looking for a 4 oz ripstop polyester cloth (not PU coated, but DWR is OK) at a local discount fabric supplier, for a coastal 16ft boat. 

  • 12 Feb 2021 14:47
    Reply # 10088369 on 10087530
    Anonymous member (Administrator)

    Gary,
    even those who cruise a good deal around the coast, will stay most of the time at anchor or in the marina (or on the trailer). With a half-decent sail cover, the Odyssey should last for a good while. However, I think that is on the heavy side for sails in the 20sqm category, or below that. I noticed that the 20sqm sail for my ‘Frøken Sørensen’ could be a bit reluctant to inflate its panels properly in very light winds. The 35sqm sail of my present ‘Ingeborg’, taken from the same roll of Odyssey III, does much better.

    I therefore suggest you look for some lighter cloth for the JR of a TS16, say 150g/sqm or 4oz.
    good luck!

    Arne


    Last modified: 12 Feb 2021 14:51 | Anonymous member (Administrator)
  • 12 Feb 2021 11:33
    Reply # 10087828 on 10087530

    The Arne designed TS16 sail.

    1 file
  • 12 Feb 2021 08:49
    Message # 10087530

    If all goes to plan and Murphy doesn't known about, I should have my next boat in April. it will of course be converted to JR with the Arne designed TS16 sail. Which I will of course make myself, but the question is what material to use? The sail area is about 16.8 sqm.

    My Odyssey lll sail has held up very well but it hasn't done any long trips so overall UV exposure is probably quite low.

    I quite like Weathermax.

    Opinions?

<< First  < Prev   ...   5   6   7   8   9   Next >  Last >> 
       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software