Wanted: Metal JR cruiser / live-a-board

  • 30 Jun 2019 18:48
    Message # 7708944

    I'm a newbie to sailing and finished my RYA Day-Skipper recently and I'm now looking for a boat with which I can do ocean crossings and long term cruising with max 2-3 crew (it needs a lot of learning before that will happen). If possible anywhere in Europe.


    Some hard facts of the (non existing?) ideal boat I'd like to have:

    - Metal hull. Preferably steel because that's a material I'm used to work with.

    - I would like a Junk Rig but a cat ketch (maybe with an option to change to JR later) would be also ok.

    - Headroom (I'm 185cm / 6' 2"). Since its supposed to be a live-a-board.

    - Size: about 27 to 40 feet, whereas 40 is quite big already.

    - As easy as can get for solo handed sailing.

    - Things that would be nice to have: insulated hull, low draft, unstayed mast(s), shower down below,


    Budget: about 30000€ max. If it is really an almost complete and up to date bluewater boat it could be also a little more. I'm also willing -and would like- to do some repairing on a boat but not if it takes much more than one season to get things running.


    Just to give you an idea what I'm aiming for: I had a look at only one boat until now: Rehnert cat ketch, beside that I was interested in Zefka (guess I was to slow in the end) and this Murray cat ketch with a nice cor10 steel hull.

    Please let me know if you are interested to sell or know any offer that could fit.

    Thank you :)

    Cheers

    Horst


  • 03 Jul 2019 07:24
    Reply # 7733766 on 7708944

    Non-members can contact me via: manorah@gmx.de

    Otherwise: Any suggestions or advice is highly welcome. :)

    And to the new owner of Zefka: please let me know if you change your mind ;)

    Horst

  • 29 Jul 2019 13:17
    Reply # 7801103 on 7708944
    Deleted user

    There is a steel boat at the boat yard I'm at in Cardiff which may suit. Not sure what they will take for it. Will need some finishing and you will need to do all the junk rigging. They guy who built boat passed away before managed to complete the job.

    Have attached picture if your interested can pass on details of guy who is in charge of selling it. 

    1 file
  • 30 Jul 2019 05:58
    Reply # 7803131 on 7708944
    Deleted user

    I have a 36’ (11 meter on deck) aluminum ketch originally intended to be junk rigged, but now dressed with a standing lug rig.  The sails could be readily modified by the addition of battens to make them into a junk rig.  Shallow-draft at 4.5’, with a centreboard that drops to 8’ draft when lowered.  The boat is in British Columbia, near Vancouver.  Interested?

    3 files
  • 30 Jul 2019 06:01
    Reply # 7803132 on 7708944
    Deleted user

    [reply at bottom of thread]

  • 30 Jul 2019 14:50
    Reply # 7803941 on 7803131
    Anonymous wrote:

    I have a 36’ (11 meter on deck) aluminum ketch originally intended to be junk rigged, but now dressed with a standing lug rig.  The sails could be readily modified by the addition of battens to make them into a junk rig.  Shallow-draft at 4.5’, with a centreboard that drops to 8’ draft when lowered.  The boat is in British Columbia, near Vancouver.  Interested?


    Yes, that really looks interesting. I do not have the know-how to do such a conversion by myself but I would be interested to get some more information. I will message you day after tomorrow.

    Beautiful boat!

  • 30 Jul 2019 14:57
    Reply # 7803962 on 7801103
    Anonymous wrote:

    There is a steel boat at the boat yard I'm at in Cardiff which may suit. Not sure what they will take for it. Will need some finishing and you will need to do all the junk rigging. They guy who built boat passed away before managed to complete the job.

    Have attached picture if your interested can pass on details of guy who is in charge of selling it. 

    I think that would be too much of a project for me. And I would have to learn from zero how to build a jr.

    I hope they find somebody to finish this project. Sad story - something like this.

    Thank you for letting me know about it!

    Cheers Horst

  • 22 Aug 2019 11:05
    Reply # 7843157 on 7708944
    Deleted user

    Yes hopefully someone takes it on.


    It is a boat yard where they build wooden boats I can ask if they could convert it.

    It will def be a bit of a project.
    It is a boat yard where they build wooden boats I can ask if they could convert it.

    I know for sure the Bristol boat yard Andy head shipwright here used to work there.


    Good luck finding something

  • 13 Nov 2019 17:35
    Reply # 8105784 on 7708944

    Thanks a lot for all the hints and comments I got! That really was much help and in the end posting here was the reason to get contact to the owner of the boat I own now. :)

    It took a little bit time but now I'm the new owner of "Zefka", an Aluminium 10m junk schooner designed by Ted Brewer. Since I'm an absolute newbie to all this it will take a while until I did all necessary repairs and ... well.. I also have to learn sailing her. But I'm already now living on the boat so there is plenty of time for all the big and small projects.

    It would be cool if there would be a junk-rig-sailing-school (something like a 5 day junk-rig-sailing-course would be a great thing :) ), but since that is not existing I will try to contact some owners of similar boats.

    Cheers



  • 14 Nov 2019 19:40
    Reply # 8107997 on 7708944

    Great to hear that you have found the sort of boat that you wanted  - and that the JRA helpted you to get there.

    if you go here, you will find a list of people who are prepared to "show you the ropes" on a junk-rigged boat.  I hope you manage to find someone to help your find your way round.

    Best of luck: I hope to read about your adventures in the magazine before too long!

       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software