Wind vane

<< First  < Prev   1   2   3   4   5   Next >  Last >> 
  • 14 May 2015 12:13
    Reply # 3343225 on 1549444
    Deleted user

    Cool idea Annie!

    I've emailed Chris, he's away on a ship so I'm not sure if he's able to get his emails, and I'm not sure when he's back.

    I've emailed Brian too.

    If they're both up for it then we can start a new thread "Brest Junket". 

  • 14 May 2015 00:53
    Reply # 3342768 on 1549444
    Off topic, I know, but I can't help being excited about the first Brittany, indeed, French junket since the Brest Festival of 1996.  (I'm sure someone will correct me if I'm wrong here.)  Any more takers?  If so, maybe Brian could start a new thread :-)
  • 13 May 2015 11:54
    Reply # 3341818 on 1549444
    Deleted user

    Thanks Brian,

    I bought a second hand Simrad TP10, and I've mounted it onto the tiller.

    I know they're not for long voyaging, I plan to use it this summer and don't mind if it's shagged out by the winter, when I'll tackle a proper trim-tab-windvane project.

    After some sea trials around Plymouth, I plan to head straight down to Brittany. The timing to meet up with you actually looks good. I gather your boat is already there? It would be great to sail in company with another junk, either you or Chris or both.

  • 12 May 2015 14:45
    Reply # 3340521 on 3326715
    Deleted user
    Matt said:... as soon as the weather is favourable the dog and I will leave dreary Plymouth for foreign shores.
    Matt, we added a Simrad tiller pilot to Paradox's Hydrovane system last season and it worked a treat, replacing our B & G system that had died. Less current draw and powerful enough for the sort of sailing we do. There are some threads about tiller pilots here: http://www.junkrigassociation.org/Sys/Search?q=tiller%20pilots&types=7&page=1, and some good info on Hydrovane's site, bottom of the page:http://www.hydrovane.com/our-product/emergency-steering/

    We'll be in Brest from June 1st, Marina du Chateau. Drop by if you're in the area? Chris Gallienne may turn up in his junk too, you never know...

    Last modified: 12 May 2015 15:08 | Deleted user
  • 10 May 2015 22:46
    Reply # 3338467 on 1549444
    Deleted user

    The OGT1 is meant for direct to tiller while the smaller OGT2 is for trim tabs and servo pendulums. I found the direct to tiller a bit iffy on our boat anyway, the rough seas tended to drive the vane rather than the other way around, especially in a quartering sea and eventually the vane broke off its mount. 

    Tiller pilots are considered little more than toys because they don't last (I've owned two, both lasted only a season), except when connected to a trim tab or servo gear, then they are seriously good. Graham's on Arion tells me his is 14 years old (but died just last week!). Which is what we are doing, adding a trim tab and keeping the wind vane as backup, for when the batteries are dead..

    Last modified: 10 May 2015 22:47 | Deleted user
  • 04 May 2015 17:50
    Reply # 3326715 on 1549444
    Deleted user

    Thanks Annie,

    I have a confession; I built about  95% of a Belcher OGT1, and have discarded it. When I test mounted it on the pushpit, high enough for the counter weight part to clear the pushpit, the whole thing was so huge that it looked more like a mizzen!

    It's hideous hugeness, plus something Chris Gallienne said (about the torque needed on the tiller when the wind is a abaft  the beam) was enough for me to give up on the OGT1. I also went and had a second look at the two or three blogs that described having built an OGT1, and had a look at their latest blog posts, and noticed that none of them were still using it.

    So I'll take Arne's advice; go sailing and see how Mariposa behaves, then decide. So I've bought myself an electronic tiller pilot and installed it, and as soon as the weather is favourable the dog and I will leave dreary Plymouth for foreign shores!

    If the tiller pilot will put up with my abuse for the summer, I'll tackle a windvane project during the winter (while teaching English in Spain, if all goes to plan).

    By the way Annie, where can I find pictures and description of the self steering windvane solution you went for on Fantail? I presume you wrote a blog post about it, but I can't find it.

    Best, Matt

  • 04 May 2015 01:03
    Reply # 3325835 on 3316974
    Matt Waite wrote:

    And while I'm musing on self-steering, has anyone got any experience with the "Quartermaster" windvane as described on page 86 of the AYRS book?


    Not at first hand, Matt, but some friends had one on a 24ft Harrison Butler yacht.  They reckoned that it worked 'OK'.  But if I were you, I'd make one of Mr Belcher's.  If it doesn't work on its own, I'm fairly sure that the trim tab and servo models all start, more or less, with the same design of wind vane.

    Last modified: 04 May 2015 01:04 | Anonymous member
  • 29 Apr 2015 22:00
    Reply # 3322026 on 1549444
    Some news about my Hebridean windvane selfsteering unit.

    I had a short trial last Saturday in a light breeze and things seemed to be working. Unfortunately my camera ran out of juice... so no photos of the unit under sail. I hope to rectify that this coming weekend.

    The remote course setting works just fine. Because it's based on a worm, it does not matter if the line goes slack at times (in practice the amount of slack is minimal) as the course setting disk cannot rotate against the worm. I'd be willing to make the details available to anyone who may want to make their own remote course setting devise. I could also make it into a kit for those who do not have the skills to make their own from scratch if there was interest.

    Photos of the unit and the remote course setting can be seen in my members album and should be mostly self explanatory. I'll be more than happy to provide any other information.

    Hopefully I'll have more news after next weeks sail.
  • 27 Apr 2015 02:38
    Reply # 3317388 on 3316918
    Matt Waite wrote:

    Hey Oscar and Paul,

    Any news to report about your Hebridean self-steering kits?



    Mat, I'm busy testing it right now. Will post and upload some pics when back ashore.
  • 26 Apr 2015 15:11
    Reply # 3316974 on 1549444
    Deleted user

    And while I'm musing on self-steering, has anyone got any experience with the "Quartermaster" windvane as described on page 86 of the AYRS book?

<< First  < Prev   1   2   3   4   5   Next >  Last >> 
       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software