Primaat 24 conversion

<< First  < Prev   1   2   3   4   Next >  Last >> 
  • 21 Sep 2019 18:53
    Reply # 7892577 on 7891576

    Thanks David, I've just scaled the sailplan to 24m², it gives something like that :


    The mast is very long, I'd liked to make a birdmouth wooden mast but perhaps it will be too heavy.
    1 file
  • 21 Sep 2019 17:20
    Reply # 7892500 on 7891576

    Hello Thomas,

    Yes, I think I would want to put a Weaverbird sail on this boat. With the rudder well forward, it will be good to go with a high AR sail, and if you want to go for more than my 22 sq m, adding an extra panel will be the way to achieve that. If you can use the CAD drawing, I will send it to you.

  • 20 Sep 2019 20:30
    Message # 7891576

    Hello, I've just bought a Primaat 24 in need of restoration, without a rig, and of course I want to put a junk rig on her. She's a 24ft plywood boat, approximately 1.1t of displacement. Not sure exactely what type of rig I want, perhaps a weaverbird style, 24m² (the same area as the original rig).

    I have a bit of work before starting the mast step or the partner, but I've started to think about the conversion. I hope you will help me with the rig !

    3 files
    Last modified: 08 Oct 2019 07:29 | Anonymous member
<< First  < Prev   1   2   3   4   Next >  Last >> 
       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software