Anonymous wrote:

A little update on some progress made here in Denmark.
Done down below for now. 
Plenty elbow room and lots of storage space for now. 
On to the aft deck. 

Looks perfect. Time to put it in the water and go sailing. ;)

Well maybe not quite but it sure does look good.

Len

Well done - youre really powering along!

Thanks Annie. 
I’m rereading a lot of your old blogposts, now that I’m working on the interior. 
Lots of good tips & tricks there. 

Looking spiffing so far!

Main and fore deck now done. 10 mm okume plywood plus 15 mm of lycell core, covered with two layers of  1,5 oz matt and one layer of 10 oz cloth using polyester. Where there is wood only, there is an extra layer of matt, fastened with silicon bronze ring shank nails at 10 cm intervals. Rubrails doubled up.

This winter I’ll be working on the interior. Next spring I’ll continue with the aft deck/cockpit/outboard well/lazarette.

I’ve put up a little video on the junk rig facebook page, where you can get a feel of the interior.

https://facebook.com/groups/1822600471338074/

Or here

https://youtube.com/channel/UCAdBCjdmN4DKZ7H2rTctyCQ