The Metamorphosis of Jasmine a 32ft Samson C-Mist - Updated 07.09.2021 - The Partners are modified and the steel collar and mast base completed.

<< First  < Prev   1   2   3   Next >  Last >> 
  • 04 May 2021 07:33
    Reply # 10439392 on 10420926

    These boats have a good reputation.  Well done finding one that seems to be a good example.  I'm sure she will look after you and respond well to her new rig. Congratulations for taking the next step towards fulfilling your dream!

  • 04 May 2021 05:23
    Reply # 10439139 on 10420926

    Good luck with the conversion Hans-Erik. 


    And Arne. Could you say a bit more about the pros & cons between your an Victor’s  sail design?

    in a different thread maybe? 

  • 02 May 2021 10:06
    Reply # 10425405 on 10420926
    Anonymous member (Administrator)

    Here is Victor's and my version presented side by side at the same scale to let you know what we are talking about.
    Arne

  • 01 May 2021 23:11
    Reply # 10422396 on 10420926

    Very similar to the Westsail 32 built in Southern California. One of these won its class in the Transpac race, so no slouch when properly rigged and sailed. My boatbuilder friend Ron Blair completed a Kendall version (flush decked) of this and sailed it to New Zealand. She averaged around 7 knots on all of the passage legs. I sailed the first leg from Los Angeles to Cabo San Lucas with him. We had 35 up to 50 knots of wind from LA to past Magdalena Bay and she handled it with no problems. Good design!!

  • 01 May 2021 22:09
    Reply # 10422152 on 10420926

    “Proper little ocean voyager”- yes, and worth waiting for I should think. I am sure she will be wonderfully spacious and comfortable too, a very big boat for a 27’ waterline length.  I am sure I am not the only one looking forward to following the evolving dream on this thread. Best wishes for a successful conversion.

  • 01 May 2021 16:40
    Message # 10420926

    At long last I have settled on 'the one' for me and have become the owner of a proper little ocean voyager.

    Jasmine08 is an amazingly well built and fair hulled 32ft Samson C-Mist ferrocement boat.

    Based on the William Atkin 'Eric' of Suhaili and Sir Robin Knox Johnston fame the C-Mist was designed for themselves by naval architects Peter Noble and Ken Davies of Samson Marine as a Gaff cutter.

    The seller bought Jasmine08s well built hull near Johannesburg, South Africa in 2008, had it trucked down to Richards Bay, and completed the build at Zululand Yacht Club where she was launched in early 2011, rigged as a Bermudan cutter.
    After only around 70 miles of successful sea trials her owner decided to emigrate to Alberta Canada in 2014 with the plan to return for Jasmine08 later and sail her via the Panama Canal to Vancouver.

    All provisioned and ready to go in January 2019, last minute illness forced the cancellation of this planned voyage which I suspect disappointed Jasmine08 greatly.

    So there she was, patiently waiting, when I saw her listed for sale late last year and ultimately completed negotiations, parted with the agreed amount and became her chuffed new owner in March this year.

    I owe a huge debt of gratitude to so many of the JRA members who have been amazingly generous with their advice and counsel to date.
    My sincere thanks to each and every one of you.

    I have decided to convert Jasmine08 into a JR Sloop and in particular I must thank two wonderful JRA members for their amazing input and patience with my emails to and fro.

    The first of these true gentlemen is Arne Kverneland who, in his inimitable fashion, (Yes Arne I have seen how you have helped so many others over the years.) patiently discussed with me the plans I had for future sailing and the choice of rig.
    Having already done so for another boat that I was about to purchase, Arne once again drew up some sailplan options for Jasmine08 that certainly were excellent in concept and technical detail.

    The second of this Norwegian duo is Victor Winterthun who was equally as willing to draw up a sail plan for Jasmine08 for me to consider. For no reason that I can explain with logic and know how, I have chosen the eight panel cambered sail he drew for Jasmine08.

    As the conversion work progresses I plan to add to this thread hoping that the metamorphosis of Jasmine08 will at least be interesting to some of you and that it may even inspire one or two newcomers or convert a fence sitter to the JR.

    For this initial post here are some pictures of Jasmine08 as I found her, my first sail on her with the seller's son and the sail drawn by Victor with which she will be sailing here in South Africa in the near future and, if my ambitions are fulfilled, will cross at least one ocean.


    9 files
    Last modified: 06 Sep 2021 23:06 | Anonymous member
<< First  < Prev   1   2   3   Next >  Last >> 
       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software