Vertue II junk rigged

<< First  < Prev   1   2   Next >  Last >> 
  • 11 Feb 2019 12:54
    Message # 7157723
    Deleted user

    Hi, this is a nice and new example of a junk rigged Vertue II.

    The boat is first launched in 2016. It is strip planked and has a professionel rigg made by boatbuilders and the sailmaker "Tuchwerkstatt".

    The asking price is 55.000,-€

    if you are interestet, there is my home page for more informations:

    https://vertue-ii-junk-rig.weebly.com/

    1 file
    Last modified: 11 Feb 2019 13:14 | Deleted user
  • 11 Feb 2019 13:59
    Reply # 7157801 on 7157723
    Deleted user

    i've seen this boat. 

    it's just brilliant! 

    highly recommended. 

    i really regret that it is out of my price–range… 

    …i'd buy it immediately, without hesitation – just as it is! 

    just sayin'…

    Last modified: 21 Feb 2019 18:44 | Deleted user
  • 21 Feb 2019 15:59
    Reply # 7176896 on 7157723

    I agree it looks brilliant.  I wonder if you would share details of the tabernacle and mast construction?  Looks very elegant. 

  • 21 Feb 2019 20:26
    Reply # 7177463 on 7176896
    Brian wrote:

    I agree it looks brilliant.  I wonder if you would share details of the tabernacle and mast construction?  Looks very elegant. 

    If you look in Magazine 61, you will find an article by Pete Hill on building a tabernace for the Vertue, Speedwell of Hong Kong.
  • 23 Feb 2019 23:46
    Reply # 7180877 on 7157723

    Annie,

    Thanks, I have seen Pete's article previously.  Vertue II's tabernacle appears to be made from alloy rather than wood.  I'd be interested in learning what was used and how it was fabricated.    

     

     

  • 24 Feb 2019 13:03
    Reply # 7184297 on 7157723
    Deleted user

    Hi Brian,

    the tabernakel is of steel with a surface of zinc. There is one part on deck and another inside the boat below the deck until the keelson. So there is no posibility that water can go inside.The mast is hold by a turnable ring at the upper end and with three latches. Under deck the room between two bulkheads is all around strengthend by fiberglass and epoxid. The fotos are befor installation.

    Best regards, Uwe

    2 files
  • 25 Feb 2019 16:11
    Reply # 7185985 on 7157723

    Uwe,  That's a great idea to avoid cutting holes in the deck.  How thick is the tabernacle steel? Is the mast aluminum?  I was unable to open the picture inside but could see pretty good from the thumbnail.  Thanks!  If you had any close up pictures of the mast base and tabernacle installed I'd love to see those as well.  Appreciate your help and ingenuity! 

  • 11 Mar 2019 19:06
    Reply # 7213394 on 7157723
    Deleted user

    Hi Brian,

    I am sorry to answer late. Here I have a foto from the first rigging.

    I hope you can see, the mast is aluminium, and the thickness of the steel.


    to all: to a fast sell I am open for offers!


    1 file
  • 17 Mar 2019 00:58
    Reply # 7227917 on 7157723

    Uwe,

    Thanks!  Great picture.  Shows what I wanted to know.  Brian

  • 27 Apr 2019 11:47
    Reply # 7306352 on 7157723
    Deleted user

    Hi to all,

    the boat is still available to a new asking price:

    52500,-€

    It can be visited in Germany at the baltic coast (Greifswald).

    For a fast selling I am open for every reasonable offer.

    Regards,  Uwe

<< First  < Prev   1   2   Next >  Last >> 
       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software