Galley alcohol, gas, diesel and induction cookers/ovens

  • 08 May 2016 21:02
    Reply # 4008909 on 1195343
    Deleted user

    cookers have always been a sore point with sailors , so here is my 5p worth. 

    last two boats i sailed we went from cheep caravan rusty gas cookers to tailors paraffin 

    the cookers were great , on both boats we had a permanent tank with double shut off valves and the paraffin went through a filter , the last one had a primer on the filter.

    the other post was we never used meths to warm the stove but used a portable blow lamp with a igniter built into it no flare ups

    this boat in work shop will have the same set up

  • 05 May 2016 22:32
    Reply # 4005333 on 4005233
    David Thatcher wrote:


    My last four boats have been equipped with LPG stoves and based on my experiences of the last 20 years with these stoves, LPG would always be the fuel of choice for me. LPG is generally readily available at very reasonable prices. If the installation of the pipes is done correctly with the proper connectors then leakage of fuel into the boat should not occur. Any proper marine gas stove should be fitted with automatic shut off at the burners so should the flame go out the gas will not continue to flow. I have an American Force 10 stove which is now almost 20 years old but still in excellent condition. On Footprints our gas is stored in two 4.5kg alloy bottles which are easy to handle and easy to stow and cost less than NZ$20 to fill. We also find that one bottle of gas lasts a very long time. On our cruise to New Caledonia in 2013 I knew that LPG was very difficult to obtain in that particular country. So I took along our two 4.5kg bottles and an extra 9kg bottle of gas to hopefully see us through the three months of cruising. On our return to New Zealand at the end of the 3 months one of the 4.5kg bottles was untouched.


    As ever, it's horses for courses.  I have no problems with kero stoves per se, but there are three things  that put me off having another one: the cost of the spares, the difficulty of finding good-quality fuel and the fact that they do make the boat grubby.  Oddly enough, I think it's the latter that I find myself objecting to the most!

    I don't like the fact that the Powers That Be can interfere with my cooker arrangement in NZ.  I don't like the bottles running out when I'm cooking.  I don't like the fact that even a 4.5 kg bottle is quite a lump to lug into and out of a dinghy and carry to a filling station when I'm cruising, to say nothing of the difficulty of finding somewhere to fill the bottles in the first place.  I can think of no anchorage, offhand, that is in easy walking distance of a place that would top up my bottles for me.  It would be different if I had a home base and access to a car.  However, I'm planning for self-sufficiency, and liquid fuel from the handy 4-Square store seems the best bet for me.

  • 05 May 2016 22:23
    Reply # 4005300 on 4004497
    Darren Bos wrote:

    If the cost of the Maxie is just replacing the burners occasionally, that doesn't seem so bad.  The parts to rebuild the pressurized stove weren't cheap and I was never

    It's not the cost, Darren, it's the fact that once the burners start corroding - de-zincifying, as David suggests - they shed bits of metal all over the cooker base which makes for messy cleaning.  Moreover they get increasingly sharp and I've cut myself on the before now, while cleaning up.
  • 05 May 2016 21:31
    Reply # 4005233 on 4002908
    Deleted user
    Annie Hill wrote:

     

    There is no way I'm going with gas on SibLim.  Quite apart from the fact that it always runs out when you are cooking for guests, the bottles are big and awkward to handle, I have to have good access to somewhere where I can get them refilled and gas is still not a particularly safe fuel to use.


     


    I have been following this discussion and it seems that there are a number of problems involved in using alcohol or kerosene stoves, including the quality of the stoves and availability of quality fuel at reasonable prices. Throughout my boating life I have used pressurised alcohol and kero stoves, and unpressurised alcohol. I have experienced all sorts of problems with burners for these stoves and have had some good flare ups, and lingering fumes from the fuel.

    My last four boats have been equipped with LPG stoves and based on my experiences of the last 20 years with these stoves, LPG would always be the fuel of choice for me. LPG is generally readily available at very reasonable prices. If the installation of the pipes is done correctly with the proper connectors then leakage of fuel into the boat should not occur. Any proper marine gas stove should be fitted with automatic shut off at the burners so should the flame go out the gas will not continue to flow. I have an American Force 10 stove which is now almost 20 years old but still in excellent condition. On Footprints our gas is stored in two 4.5kg alloy bottles which are easy to handle and easy to stow and cost less than NZ$20 to fill. We also find that one bottle of gas lasts a very long time. On our cruise to New Caledonia in 2013 I knew that LPG was very difficult to obtain in that particular country. So I took along our two 4.5kg bottles and an extra 9kg bottle of gas to hopefully see us through the three months of cruising. On our return to New Zealand at the end of the 3 months one of the 4.5kg bottles was untouched.

    Of note also is that stove on Footprints is ungimbaled and sits athwartships. We have proper potholders to hold pots, or the kettle in place and we have found this to be a very satisfactory arrangement even for cooking on an ocean passage, and does away with the need for the complication and space robbing gimbaled installation of a boat stove. 

    Last modified: 05 May 2016 21:36 | Deleted user
  • 05 May 2016 18:30
    Reply # 4004796 on 4002908
    Annie Hill wrote:

    ... or a fast and corroding Maxie. 

    Thinking a bit more about why the Maxie burners corrode, I conclude that it's due to dezincification, as they show the characteristic red coloration. This happens when the brass used has more than 15% zinc in its makeup. The answer is clearly to use stainless steel, copper, bronze, or brass with more copper in it; but copying the design directly is not really an easy option for small quantities, as some of the components need specific press tools and others need some precise machining.
  • 05 May 2016 17:10
    Reply # 4004581 on 1195343

    I agree that the design of marine alcohol cookers has got some catching up to do, now that the fuel has become both more readily available and cleaner, as a result of two things, I think - 1: the growth of the market in flueless room heaters, and 2: surfing the web, I found several instances of NGOs and non-profits pushing the use of alcohol as a clean-burning cooking fuel for third world countries. However, the design of alcohol burners has been inhibited, I think, by the fact that the designer of the Origo is doing much of the pushing, and has even brought out a simple cheap version of it, called the CleanCook.

    At least as far back as the 19th century, there have been whale oil and then kerosene cookers that used a wick and a perforated chimney as a way of introducing jets of fast-moving air into the fuel vapour, ensuring complete combustion. I've seen them relatively recently, in places as widely spaced as Iceland, South Africa and Tonga. These are still made in vast numbers in India, China and some other places, and would work with alcohol, too, with minimal adaptation. There have also been gravity fed versions with the same kind of perforated chimney (but neither version has been suitable for marine use). However, I feel that the first version suffers from the same drawback as the Origo, ie, when not in use, the supply of fuel is not totally closed off, and there is a faint odour of fuel. A good marine cooker needs to have a needle valve, or more expensively, the kind of carburettor that's found on Dickinson and Refleks heaters, to regulate and to totally shut off the fuel. The second version of kerosene cooker has such a needle valve. 

    The ideal KISS alcohol burner might be something along the lines of a perforated chimney, on top of a simple cup (probably with some wicking material in it) into which the fuel is controllably delivered. There remains the not entirely trivial problem of designing such a perforated chimney style of alcohol burner that's easy to make, at low cost, with minimal tooling, out of marine grade materials. The rest is straightforward. The fuel can be supplied by either gravity or a low pressure tank, and offshore sailors are aware of how to gimbal a stove properly, and how to keep the pans where they belong when it's rough. 


  • 05 May 2016 16:36
    Reply # 4004497 on 1195343
    Deleted user

    Annie, you've lived with a Kero stove, so maybe you'd be fine with a pressurized alcohol stove.  I've had brief experiences with what I think was a Hillerange alcohol stove.  Even after a full rebuild it was always temperamental and I was always prepared for flames to go to the headliner.  I did the rebuild and I admit I never lived with the stove long enough to get really good with it.  However, in comparison, the Maxie stoves are pretty much effortless to use and the preheating is a piece of cake.  If the cost of the Maxie is just replacing the burners occasionally, that doesn't seem so bad.  The parts to rebuild the pressurized stove weren't cheap and I was never happy with the result.  I'm looking forward to see what David comes up with in his Maxie-Sea-Swing build as I'm also not a fan of the Maxie Gimbals or integral tank.  However, my experience is that the Maxie burners represent the sweet spot in terms of safety and heat (Origo is colder and safer, pressurized is hotter and less safe).

  • 05 May 2016 00:40
    Reply # 4003183 on 1338587
    Patric A wrote:Unfortunately it seems to be more of a browser issue as none of my preferred Android browsers works all that well with Wild Apricot. Might have a look at chrome though.

    Edit:
    Why wait? Chrome works far better. I'll have to see if I can get used to its little quirks.

    there is a new browser called Vivaldi I'm trying out.
  • 04 May 2016 21:56
    Reply # 4002908 on 1195343
    I'm in danger of hi-jacking David's thread, so if anyone wants to comment on what I've said about cookers, perhaps they could do so here.

    Alcohol Cookers

    There is no way I'm going with gas on SibLim.  Quite apart from the fact that it always runs out when you are cooking for guests, the bottles are big and awkward to handle, I have to have good access to somewhere where I can get them refilled and gas is still not a particularly safe fuel to use.

    So I'm going for alcohol.  Yes, it's more expensive, but infinitely more convenient - I can buy it in any grocery store.  However, the major problem is the availability of a good, marine cooker.  I am still debating whether to fit my cooker fore and aft or athwartships.  If the latter, then the problem of pivoting it goes away and I can choose between a slow Origo or a fast and corroding Maxie.  I have managed to buy an excellent pressure alcohol stove, that uses the tank as ballast, slung low down under the cooker: however it takes up a huge amount of room.  I am working on getting a second-hand one, but it's not working properly and has to go back to the owner to get it sorted before I purchase.  If he can do so, I end up with spare burners which are no longer made, as far as I can tell.

    Does anyone have more information on pressure alcohol cookers?  Availability of parts?  Does anyone have a working burner that they would sell me?  Or cooker, for that matter?  I have heard that the burners last for years - much longer than kero ones.  Does anyone know if that is correct?  I know they were tremendously popular in North America at one time - much more so than kero.

    While on the matter, I toy with the idea of a genuine Sea Swing cooker.  Anyone got one of those in need of a home?

  • 11 Jul 2013 22:44
    Reply # 1338587 on 1195343
    Deleted user
    Unfortunately it seems to be more of a browser issue as none of my preferred Android browsers works all that well with Wild Apricot. Might have a look at chrome though.

    Edit:
    Why wait? Chrome works far better. I'll have to see if I can get used to its little quirks.
    Last modified: 11 Jul 2013 22:55 | Deleted user
       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software