HFJY34

  • 01 Oct 2021 18:07
    Reply # 11133453 on 11132291
    Anonymous wrote:
    Anonymous wrote:

    Last weekend, I visited Frederik and, with his kind permission, shot a bit of video footage of his boat build. The trip to Denmark, the footage of Frederik's boat and some more footage of my daughter's junk rigged "Alanouwoly" can be seen here (along with some short clips of my boat in its current state of build).


    https://www.youtube.com/watch?v=TbJMe1htNwo


    And now again, at the end of September, we visited again and shot a bit more footage of Frederik's progress. The hull is glassed and faired, and the boat is pretty much ready for paint and the big roll over. Looking good!


    The footage can be seen towards the end of this video, which also shows the current state of progress on my build...

    https://www.youtube.com/watch?v=PbjrPyKhJqk

    Our thanks to Frederik for his hospitality, and to Denmark generally for being such a beautiful place to visit :-)

    Thanks for making those videos of the Hogfish project Tony, that is one confidence inspiring strong hull!  With all due respect to Frederik for following Chris Morejohn's methods I'd be interested to hear what anyone else would think of using one coat of epoxy as an interface between the ply and the first layer of polyester/glass, those nails must have cost a fortune. As far as I know epoxy sticks to grp, and it definitely sticks to plywood. Well done Frederik, I think the hull looks fairer than you're giving yourself credit for, should paint up really well.. 
  • 01 Oct 2021 08:30
    Reply # 11132291 on 10590278
    Anonymous wrote:

    Last weekend, I visited Frederik and, with his kind permission, shot a bit of video footage of his boat build. The trip to Denmark, the footage of Frederik's boat and some more footage of my daughter's junk rigged "Alanouwoly" can be seen here (along with some short clips of my boat in its current state of build).


    https://www.youtube.com/watch?v=TbJMe1htNwo


    And now again, at the end of September, we visited again and shot a bit more footage of Frederik's progress. The hull is glassed and faired, and the boat is pretty much ready for paint and the big roll over. Looking good!


    The footage can be seen towards the end of this video, which also shows the current state of progress on my build...

    https://www.youtube.com/watch?v=PbjrPyKhJqk

    Our thanks to Frederik for his hospitality, and to Denmark generally for being such a beautiful place to visit :-)

  • 27 Jul 2021 19:36
    Reply # 10778025 on 7155071

    Done with fiberglassing for now. 

    On to putty and  bit of fairing.

    first layer of 1,5 oz matt fastened with 9500 silicon bronze ring shank nails

    followed by 2 more layers of matt and a final layer of 10 oz cloth. 

    All laid up with polyester raisin of course..

    5 files
  • 04 Jun 2021 20:20
    Reply # 10592212 on 7155071

    Thanks Tony. Nice work & good to have you over. 

    Need lead, anyone..?

  • 04 Jun 2021 08:17
    Reply # 10590278 on 7155071

    Last weekend, I visited Frederik and, with his kind permission, shot a bit of video footage of his boat build. The trip to Denmark, the footage of Frederik's boat and some more footage of my daughter's junk rigged "Alanouwoly" can be seen here (along with some short clips of my boat in its current state of build).


    https://www.youtube.com/watch?v=TbJMe1htNwo

    Last modified: 04 Jun 2021 11:12 | Anonymous member
  • 04 May 2021 20:39
    Reply # 10441895 on 10439586
    Anonymous wrote:

    And please, don't allow anyone to persuade you to launch before the boat is finished.  I can't remember how many times I have heard people say " a boat is never finished".

    This made me think. First I am thinking of launching before finishing in my case but my case is different. I have a boat that lives on a trailer and will never live on it (22foot). This year it will go in the water with no mast but with three bunks and a cooker so we can go camping. We have in the past filled our 16foot boat with camping gear and set up camp on a nearby island. This year we hope to not have to set up as much. after two weeks it is back on the trailer in the back yard for step two.

    However, for a home, finish first then launch will: give reason to keep working  and pushing to get finished. Allow work to continue without having to clean up for lunch, supper and sleeping. Finishing in the water means moving house to one end of the boat to work on the other and then moving house again when finished... maybe more than twice the work. So choose the yard wisely and finish before launch. Working on a boat you are also living in or even a boat that is on the water will be one big delay and merely add more truth to the "a boat is never finished" saying.

    This boat is a try out for my family, mostly my wife. We will find out if  we will continue to camp in a small boat for a few weeks in the summer, go back to land camping or go for a bigger boat for longer trips.


  • 04 May 2021 13:43
    Reply # 10440467 on 7155071

    Thanks Annie. 

    As far as systems goes, we are on the same frequency. ( guess where I got some of my inspiration from..). 

    Concerning finish I’m quite easily satisfied s long as it looks good to my eye. 

    Anyways, couple more years to go. 



  • 04 May 2021 08:10
    Reply # 10439586 on 7155071

    Well done.  The rest will take as long as it takes and will largely depend upon whether you are happy with a simple plywood interior or want something with more texture.

    Systems: if a boat has systems it's too complicated.  Installing my water tanks took the time that was required to buy the jerricans and stow them under the cabin sole.  Likewise the engine installation was asking a friend to lift it up for me while I secured it to the transom.  Oh! And I had to attach the petrol line.

    And please, don't allow anyone to persuade you to launch before the boat is finished.  I can't remember how many times I have heard people say " a boat is never finished".  Well FanShi is.  Some details yet to do, but if you think a lack of loose covers on the settee and toggles to keep the portholes open, make a liar out of me, then you are even more literal than I am!

  • 01 May 2021 17:05
    Reply # 10421026 on 7155071

    ʕ´•ᴥ•`ʔ 

    Last modified: 01 May 2021 17:06 | Anonymous member
  • 01 May 2021 15:41
    Reply # 10420612 on 7155071

    Baie baie dankie Oom Arp & good luck with the new rig for your boat. 

       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software