lifting a tapered spar vertically

  • 22 Nov 2026 16:20
    Reply # 13789357 on 13789304
    Anonymous wrote:
    Tony Brown wrote:Absolutely! Or a fitting of some sort between partners and sail bundle.

    The best example of such a fitting can be found in JRA NL 38, p28. It shows how David T fitted a clamp-on flange on the mast. To this he bolted all the turning blocks he needed. The thing is that the flange could be moved up or down to get in the optimal position on Tystie, with her tallish pilot hose. No holes needed in the mast.
    This is a most brilliant method, which I applaud.
    Copy it!

    Arne
    PS: ..and yes, any crane operator would accept a sling which is terminated to this one…


    That is pretty much exactly what I meant, Arne. I have similar fittings.
  • 22 Nov 2026 11:07
    Reply # 13789304 on 13789299
    Anonymous member (Administrator)
    Tony Brown wrote:Absolutely! Or a fitting of some sort between partners and sail bundle.

    The best example of such a fitting can be found in JRA NL 38, p28. It shows how David T fitted a clamp-on flange on the mast. To this he bolted all the turning blocks he needed. The thing is that the flange could be moved up or down to get in the optimal position on Tystie, with her tallish pilot hose. No holes needed in the mast.
    This is a most brilliant method, which I applaud.
    Copy it!

    Arne
    PS: ..and yes, any crane operator would accept a sling which is terminated to this one…


  • 22 Nov 2026 10:21
    Reply # 13789299 on 13789156
    Anonymous wrote:

    I have always had an eye  of some sort, at the base of the mast, to secure it in position in case it tries to jump out of its step or twist (depending on the mast and step).  You can use this to take a line to the loop and secure the loop in the place you want it for hauling, or as extra security on an icicle hitch.  With a positive preventer, which will obviously stop the strop sliding up, I have never had any crane operator hesitate about taking out or stepping the mast.

    Absolutely! Or a fitting of some sort between partners and sail bundle.
  • 21 Nov 2026 18:59
    Reply # 13789156 on 13788921

    I have always had an eye  of some sort, at the base of the mast, to secure it in position in case it tries to jump out of its step or twist (depending on the mast and step).  You can use this to take a line to the loop and secure the loop in the place you want it for hauling, or as extra security on an icicle hitch.  With a positive preventer, which will obviously stop the strop sliding up, I have never had any crane operator hesitate about taking out or stepping the mast.

  • 21 Nov 2026 08:38
    Reply # 13789007 on 13788921

    An icicle hitch is the answer for how to do it, but how to reassure the boatyard is another matter...

  • 20 Nov 2026 23:36
    Message # 13788921
    Anonymous member (Administrator)

    Received an email recently referring to two cases where a boatyard in the UK refuses to use a crane to lift a tapered aluminium spar, for stepping through the deck, one of them "worried" that if the mast slipped it would not be covered by insurance.

    There must be plenty of ways of creating the necessary mechanical restraint, to prevent a tapered mast slipping out of the sling. 

    I think we have had this question before - how to reassure the reluctant boatyard crane operator?