Invicta 26 conversion

  • 17 Nov 2026 14:10
    Message # 13786286

    Hello all,

    I'm currently refitting my Invicta 26 and have long wanted to convert a my yacht to a junk rig.

    I would like, if possible to locate the new mast through the forward hatch, stepping it at the keel, but would this move be far enough forward? I assume it would be down to the sail plan chosen and sail design itself? This would be a move forward of just over 1.5'.

    2 files
  • 18 Nov 2026 22:01
    Reply # 13787707 on 13786286
    Anonymous member (Administrator)

    The Invicta 26 is a lovely boat. My IF, Ingeborg is similar, but to me the Invicta takes the prize.
    However, trying to fit a sloop JR with the mast through the hatch was not easy. I had to push my luck here and draw the sail with a mast balance of almost 29%. I would not have been afraid of trying this if the boat were mine. However, I am a bit afraid of pushing this design onto innocent people...


    What do you think, folks?
    At least, this sail position will make it easy to steer downwind, even in a blow.

    Chers,
    Arne


    (..full size diagram in Arne's sketches, section 9-30...)


    Last modified: 19 Nov 2026 12:18 | Anonymous member (Administrator)
  • 18 Nov 2026 22:20
    Reply # 13787721 on 13786286

    i would consider some two or three degrees of mast rake to reduce the balance a little bit.

    ueli

  • 19 Nov 2026 04:46
    Reply # 13787918 on 13786286
    Anonymous member (Administrator)

    or Amiina SJR?

    33% mast balance.

    Mast through the hatch but a little aft of Arne's suggested position.

    However, for the same sail area, the mast would need to be a little taller than the mast suggested by Arne.

    Last modified: 19 Nov 2026 07:02 | Anonymous member (Administrator)
  • 19 Nov 2026 07:53
    Reply # 13787994 on 13787707

    Arne wrote:

    I had to push my luck here ad draw the sail with a mast balance of almost 29%. I would not have been afraid of trying this if the boat were mine. However, I am a bit afraid of pushing this design onto innocent people...


    What do you think, folks?

    29% mast balance is nothing to be worried about! The advantages of higher mast balances are overwhelming.

  • 20 Nov 2026 09:53
    Reply # 13788639 on 13786286

    Thank you all, greatly appreciated. I have just realised that I've placed the post in the wrong section, apologies for that.

  • 20 Nov 2026 17:15
    Reply # 13788772 on 13786286
    Anonymous member (Administrator)

    Gary,

    just for the fun of it, I have now drawn another sailplan (Johanna 70 w. AR =1.90) to let the mast go through the foredeck. The sailplan even shows the sail with the boom canted forward enough to shift the CE closer to the mast (and thus CL when running before). As can be seen, this sail is bigger, and with a shorter mast.

    Which to choose:

    • ·         How easily can the mast be fitted through the hatch (offset to one side)?
    • ·         How will passage forward past that mast be?
    • ·         How is access to a light and tall (aluminium or carbon) mast be?

    If the issues with the first version can be solved, I guess I would go for this one, now that Paul S has proven that the hi-balance concept works just fine.

    If fitting the mast through the hatch appears to be awkward, I would go for the Johanna 70 sail with the mast through the foredeck. This solves any structural or access problems. On the other hand, this sail will have more steering bias downwind. I therefore suggest preparing it for canting the boom forward for downwind sailing. On my own Ingeborg, I have not bothered, and rather reef if steering gets heavy. I will still be running before above the hullspeed.

    In a way, these two sailplans sit in each end of my Johanna style master sails.

    Hope this makes some sense.

    Arne
    PS: I never bother with drawing sheets and parrels in my sailplans. You will find these in “Junk Rig for Beginners”.


    (.. full size diagrams in Arne's sketche, section 9-31 and -32..)
    Last modified: 20 Nov 2026 17:29 | Anonymous member (Administrator)