Sail for a J Welsford "Fafnir"

  • 18 Apr 2012 07:08
    Reply # 892164 on 886707
    Deleted user
    Thank you all for the encouragement. I will be sending this off to John W but I wanted to make sure there was nothing drastically wrong first.
    Antony
  • 12 Apr 2012 02:35
    Reply # 887370 on 886707
    It might be well worthwhile approaching John himself.  He is very pro junk rig and I am sure would encourage you with your ideas.
  • 11 Apr 2012 19:38
    Reply # 887091 on 886707
    It all looks sensible to me. The placement of the CE in the same place it it would be for a cutter rig is right, if there is camber in the panels, but a long keel design like this is fairly uncritical in placement of the rig.
  • 11 Apr 2012 04:59
    Message # 886707
    Antony Harvey wrote:I am seeking advice / comments for the conversion of a John Welsford 4m Fafnir mini cruising cutter. My member profile has an album that sets out the modifications but essentially I drew a Van Loan type sail of close to the original area and placed the junk C of E over the original cutter rig C of E. Any comments would be greatly appreciated, particularly if there is something drastically wrong.

       " ...there is nothing - absolutely nothing - half so much worth doing as simply messing about in junk-rigged boats" 
                                                               - the Chinese Water Rat

                                                              Site contents © the Junk Rig Association and/or individual authors

Powered by Wild Apricot Membership Software